Presentation title Authors DOI Numerical model of corrosion influence on mechanical behavior of steel AH36 Darko Pastorcic, Goran Vukelic, Zeljko Bozic https://doi.org/10.53254/ESISTUBE.ECF23.88 Fracture Toughness of a 9Cr ODS steel determined on tube specimens B. Rais, J. Garnier, E. Pons, B. Marini, J. Besson https://doi.org/10.53254/ESISTUBE.ECF23.89 Hydrogen embrittlement of a martensitic carbon steel at high hydrogen pressure Bernd Loder, Gregor Mori https://doi.org/10.53254/ESISTUBE.ECF23.90 Finer-scale residual stress characterisation in laser-welded Eurofer97 steel for fusion plant Tan Sui https://doi.org/10.53254/ESISTUBE.ECF23.91 Simulation of slant and cup-cone fracture using a nonlocal GTN model integrating two internal lengths A. El Ouazani Tuhami , S. FeldPayet , S. Quilici, N. Osipov, J. Besson https://doi.org/10.53254/ESISTUBE.ECF23.92 Size effect and finite fracture mechanics. Application to the study of microcracks initiation in particle reinforced composites I.G. García, J. Justo, A. Zurita, V. Mantic, M.T. Aranda https://doi.org/10.53254/ESISTUBE.ECF23.93 Effect of chemical heterogeneities (segregations) on fracture toughness of low alloy ferritic steel used for large forged components in the nuclear industry A. Christal, A. Parrot, P. Todeschini, A-F. Gourgues, J. Besson https://doi.org/10.53254/ESISTUBE.ECF23.94 On the localizability of voids in adhesive joints loaded in mode I Dennis Domladovac, Stephan Marzi, Christian Wolf, Igor Kryukov, Martin Kahlmeyer, Stefan Böhm https://doi.org/10.53254/ESISTUBE.ECF23.95 Effect of a single overload on the cyclic R-curve behaviour of a γtitanium aluminide Arthur Lintner, Reinhard Pippan, Martin Schloffer, Anton Hohenwarter https://doi.org/10.53254/ESISTUBE.ECF23.96 Hydrogen increased ductility due to martensitic transformation versus hydrogen embrittlement in 304L stainless steel: the role of the deformation rate Lisa Claeys , Tom Depover , Kim Verbeken https://doi.org/10.53254/ESISTUBE.ECF23.97 Analysis of Compressive Behaviour of Pristine and Cracked 5-Stringer Butt-Joint Panels Made from Carbon Fibre Reinforced Thermoplastic Polymer Jakub Šedek, Jarmil Vlach, Roman Růžek https://doi.org/10.53254/ESISTUBE.ECF23.98 Experimental and numerical study of fracture behaviour of U. Jargalsaikhan, N. Leung, H. Wan, L. https://doi.org/10.53254/ESISTUBE.ECF23.99
RkJQdWJsaXNoZXIy MjM0NDE=