ECF22

22nd European Conference on Fracture - ECF22 ESIS Video recordings ISBN: 978-88-31482-13-4

22nd European Conference on Fracture – ECF22 – Belgrade (Serbia) 2018 22nd European Conference on Fracture – ECF22 was held in Belgrade (Serbia), August 26-31, 2018. Organizing Committee Aleksandar Sedmak (University of Belgrade, Serbia) Zoran Radaković (University of Belgrade, Serbia) Snežana Kirin (Innovation Center, Serbia) Miloš Milošević (Innovation Center, Serbia)

VIDEO-PRESENTATIONS Presentation title Authors DOI Pipe ring specimen for measurement a fracture toughness of pipe line material D. Gubeljak, D. Damjanovic, A. Likeb, D. Kozak https://doi.org/10.53254/ESISTUBE.ECF22_A.1 Rice Perspectives on dynamic fracture arising from study of earthquake ruptures J. Rice https://doi.org/10.53254/ESISTUBE.ECF22_A.2 The State of the Art in Very High Cycle Fatigue Research Y. Hong https://doi.org/10.53254/ESISTUBE.ECF22_A.3 Application of fracture mechanics to S N curve prediction Requirements and perspectives U. Zerbst https://doi.org/10.53254/ESISTUBE.ECF22_A.4 Challenge toward Fracture Mechanics in Atomic Scale T. Kitamura, T. Sumigawa, T. Shimada https://doi.org/10.53254/ESISTUBE.ECF22_A.5 Damage tolerance in bioogical and metallic materials R.O. Ritchie https://doi.org/10.53254/ESISTUBE.ECF22_A.6 Mechanisms of hydrogen embrittlement in metals L. Curtin https://doi.org/10.53254/ESISTUBE.ECF22_A.7 Micromechanical Modeling of Fracture in Metallic Materials M. Kuna https://doi.org/10.53254/ESISTUBE.ECF22_A.8 Physical explanation of the critical distance theory and a link with structure of material A. Vedernikova, A. Kostina, A. Petrova, O. Plekhov https://doi.org/10.53254/ESISTUBE.ECF22_B.1 Prediction model for fatigue life and limit of steel based on small crack micromechanics H. Ito, K. Shibanuma, K. Ueda, M. Kinefuchi, K. Sukuzi, M. Enoki https://doi.org/10.53254/ESISTUBE.ECF22_B.2 Relation between structure of metallic materials and fracture properties under conditions of solid p S.A. Altroshenko, A.D. Evstifeev, Yu.V. Petrov https://doi.org/10.53254/ESISTUBE.ECF22_B.3 Residual stress estimation based on 3D DIC displacement field measurements around drilled holes T. Brynk, B. Romelczyk‐Baishya https://doi.org/10.53254/ESISTUBE.ECF22_B.4 Simulating toughness properties under varying temperatures with micromechanical and phenomenological D. Lenz, M. Könemann, V. Brinnel, J. Langenberg, S. Münstermann https://doi.org/10.53254/ESISTUBE.ECF22_B.5 Temporal effects of dynamic yielding under high rate loading N.S. Selyutina, Yu.V. Petrov https://doi.org/10.53254/ESISTUBE.ECF22_B.6

Presentation title Authors DOI The effect of heat treatments on the microstructure and fracture toughness properties of drawn tungs V. Nikolić, J. Riesch, M. Pfeifenberger, R. Pippan https://doi.org/10.53254/ESISTUBE.ECF22_B.7 The Effect of Microstructure Constituents on the Static and Dynamic Fracture Behavior of High Streng F. Tioguem‐Teagho, A.F. Gourgues Lorenzon, M. Maziere, F. Tankoua, A. Galtier https://doi.org/10.53254/ESISTUBE.ECF22_B.8 The effect of negative stress triaxialities on ductile damage and fracture behavior in metal sheets M. Schimidt, S. Gerke, M. Brünig https://doi.org/10.53254/ESISTUBE.ECF22_B.9 An Experimental and Numerical Investigation of the Anisotropic Plasticity and Fracture Properties F. Shen, J. Lian, T. Li, S. Münstermann, V. Kokotin, T. Pretonus https://doi.org/10.53254/ESISTUBE.ECF22_B.10 Analysis of an as cast 3 2% Si Slab to elucidate fundamental causes of the fracture mechanism Guy Khosla, Daniel Balint, Didier Farrugia, Matthew Hole, Catrin M. Davies https://doi.org/10.53254/ESISTUBE.ECF22_B.11 Biaxial experiments on the effect of non proportional loading paths on damage and fracture behavior M. Zistl, S. Gerke, M. Brünig https://doi.org/10.53254/ESISTUBE.ECF22_B.12 Bio inspired design ideas for improving the damage resistance O. Kolednik https://doi.org/10.53254/ESISTUBE.ECF22_B.13 Characterization of the ductile and brittle failure of thin walled tubular materials C. Caisso, N. Jacques, Y. Dammouche, H. Fresnei, A. El Malki Alaoui https://doi.org/10.53254/ESISTUBE.ECF22_B.14 Clarification of micromechanism on Brittle Fracture Initiation Condition of TMCP Steel with MA as th T. Kawabata, S. Kimura, H. Takatani, K. Kagehira, T. Mitsuzumi https://doi.org/10.53254/ESISTUBE.ECF22_B.15 Cleavage fracture assessment of hot charged steel slab using experimental and numerical approaches R. Talemi, N. Gilani, Q.T. Ngo, A. de Souza Braga Neto, A. Willems https://doi.org/10.53254/ESISTUBE.ECF22_B.16 Cohesive zone modeling for three dimensional elastic plastic fatigue cracking with significant const H. Yuan, X. Li, H. Li https://doi.org/10.53254/ESISTUBE.ECF22_B.17 Cohesive zone modeling of interface influences on the tensile fracture behavior of bimodal nanostruc X. Guo https://doi.org/10.53254/ESISTUBE.ECF22_B.18 Computational simulation of abnormal fracture appearance in G. Testa, N. Bonora, D. Gentile https://doi.org/10.53254/ESISTUBE.ECF22_B.19

Presentation title Authors DOI dwtt of x65 steel using micromechanical Computer simulation of cleavage fracture surface morphologies in steel plates T. Aikawa, S. Aihara, T. Kawabata, H. Yunagimoto, K. Shibanuma https://doi.org/10.53254/ESISTUBE.ECF22_B.20 Crystallographic orientation dependent growth modes of microstructurally fatigue small cracks in a l A. Maenosono, M. Koyama, Y. Tanaka, S. Ri, Q. Wang, H. Noguchi https://doi.org/10.53254/ESISTUBE.ECF22_B.21 Development of FEM model for residual stress calculations based on displacement field measurements n T. Brynk, B. Romelczyk‐Baishya https://doi.org/10.53254/ESISTUBE.ECF22_B.22 Effect of socket depth on failure type of fasteners B. Tanrikulu, M. Burak Toparli, E. Kilinçdemir, S. Yurtdaş, U. Ince https://doi.org/10.53254/ESISTUBE.ECF22_B.23 Estimation of fracture toughness of metallic material by using instrumented flat end shaped indentat W. Kim, J. Kim, S. Choi, D. Kwon https://doi.org/10.53254/ESISTUBE.ECF22_B.24 Fatigue Behaviour of Additively Manufactured Inconel 718 produced by selective laser melting K. Solberg, J. Torgersen, F. Berto https://doi.org/10.53254/ESISTUBE.ECF22_B.25 Fatigue behaviour of single crystal nano sized copper beams P. Hansson https://doi.org/10.53254/ESISTUBE.ECF22_B.26 Fatigue Crack Growth Behavior and Associated Microstructure in a Metastable High Entropy Alloy T. Eguchi, M. Koyama, Y. Fukushima, C.C. Tasan, K. Tsuzaki https://doi.org/10.53254/ESISTUBE.ECF22_B.27 Grain size influence on fatigue behaviour in a CuZnAl PE SMA V. Di Cocco, F. Iacoviello, F. Carlino, S. Natali https://doi.org/10.53254/ESISTUBE.ECF22_B.28 Microstructure analyses and multiscale stochastic modelling of steel structures operated in the extr V. Lepov, A. Grigoriev, M.S. Bisong, V. Achikasova, K. Lepova, N. Balakleiskii, B. Loginov, A. Loginov https://doi.org/10.53254/ESISTUBE.ECF22_B.29 Microscopic strain calculations at the onset of coalescence in nodular cast iron V. Trejo, A. Buljiac, F. Hild, T. Morgeneyer, M. Bernacki, P.‐O. Bouchard https://doi.org/10.53254/ESISTUBE.ECF22_B.30 Investigation and Modelling of Local Crack Arrest in Ferritic J. Tlatlik, D. Siegele https://doi.org/10.53254/ESISTUBE.ECF22_B.31

Presentation title Authors DOI Bainitic Steels Under Dynamic Loading Influence of ultrafine grained structure produced by equal channel angular pressing on dynamic respo I. Smirnov, A. Konstantinov https://doi.org/10.53254/ESISTUBE.ECF22_B.32 Numerical and experimental investigations of the critical values of J integral for the steel of steam pipelines Njana Aleksic, Ljubica Milovic, Aleksandar Grbovic, Abubkr Hemer, Vujadin Aleksic, Milorad Zrilic https://doi.org/10.53254/ESISTUBE.ECF22_B.33 Numerical Simulation of Fatigue Crack Growth in Straight Lugs Equipped with Efficient Structural Hea M. Moonens, E. Wyart, D. De Baere, M. Hinderdael, P. Guillaume https://doi.org/10.53254/ESISTUBE.ECF22_B.34 Optimization of the fracture mechanical properties of additively manufactured EN AW 7075 J.‐P. Brüggermann, L. Risse, G. Kullmer, H.A. Richard https://doi.org/10.53254/ESISTUBE.ECF22_B.35 Understanding the tensile strength of ceramics in the presence of small critical flaws E. Martin, D. Leguillon, O. Sevecek, R. Bermejo https://doi.org/10.53254/ESISTUBE.ECF22_C.1 Validating 3D two parameter fracture mechanics in structural integrity assessments C.A. Simspon, S. Tonge, A. Cinar, C. Reinhard, T.J. Marrow, M. Mostafavi https://doi.org/10.53254/ESISTUBE.ECF22_C.2 Validity limits of the one parameter elastic plastic fracture mechanics J integral considering G.H.B. Donato, F.C. Moreira https://doi.org/10.53254/ESISTUBE.ECF22_C.3 A finite fracture mechanics approach to debonding accounting for residual friction P. Cornetti, M. del Mar Muñoz‐Reja, V. Mantič, A. Sapora https://doi.org/10.53254/ESISTUBE.ECF22_C.4 Toughness of highly ductile pipeline steels J. Besson, T. Sakimoto, Y. Madi https://doi.org/10.53254/ESISTUBE.ECF22_C.5 Tomographic investigation of the fracture parameters of the quasi brittle specimens subjected to fou D. Vavŕík, P. Beneš, T. Fíla, P. Koudelka, I. Kumpová, D. Kytýŕ, L. Vavro, M. Vavro, M. Vopálenský https://doi.org/10.53254/ESISTUBE.ECF22_C.6 Theoretical Prediction of Fracture of Initially Crack Free Brittle Materials F. Ağri Akçay https://doi.org/10.53254/ESISTUBE.ECF22_C.7 The effect of vanadium alloying on temperature dependence of deformation mechanisms and fracture mod E. Astrafurova, V.A. Moskvina, G.G. Maier, N.K. Galchenko, S.V. https://doi.org/10.53254/ESISTUBE.ECF22_C.8

Presentation title Authors DOI Astrafurov, E.V. Melnikov, A.S. Fortuna, A.G. Burlachenko, A.I. Gordienko Subcritical crack growth in sandstone in aqueous environment with different calcium ion concentratio Y. Nara, H. Takeda https://doi.org/10.53254/ESISTUBE.ECF22_C.9 Study of Various Conical Projectiles Penetration into Inconel 718 Target Israr ul Haq, Guo Weiguo, Mariyam Arif, Muhammad Zakir Sheikh https://doi.org/10.53254/ESISTUBE.ECF22_C.10 Stable crack growth in Al Cu Mg alloy under various stiffness of loading system in bodies with conce M. Tretyakov, T. Tretyakova, V. Wildeman https://doi.org/10.53254/ESISTUBE.ECF22_C.11 Soft network composite materials with deterministic and bio inspired designs Y. Huang https://doi.org/10.53254/ESISTUBE.ECF22_C.12 Reference toughness – a pragmatic tool to estimate ductile brittle transition temperatures Sakari Pallaspuro, Saara Mehtonen, Jukka Kömi, Zhiliang Zhang, David Porter https://doi.org/10.53254/ESISTUBE.ECF22_C.13 Quasi DC Potential Drop Measurements for Materials Testing J. Corcoran, C.M. Davies, P. Cawley, P.B. Nagy https://doi.org/10.53254/ESISTUBE.ECF22_C.14 On the determination of characteristic fracture toughness quantities of micro and nanocomposites D. Kozic https://doi.org/10.53254/ESISTUBE.ECF22_C.15 New experimental results for brittle fracture of V notched TPB specimens A. Macias, V. Mantič, A. Sapora, L. Távara, F. Paris https://doi.org/10.53254/ESISTUBE.ECF22_C.16 Mixed mode fracture parameters determination fo notched polyurethane materials R. Negru, D.A. Şerban, F. Berto, L. Marşavina https://doi.org/10.53254/ESISTUBE.ECF22_C.17 Meso scale modelling of mechanical behaviour and damage evolution in normal strength concrete J. Wang, A.P. Jivkov, D. Engelberg, Q. Li https://doi.org/10.53254/ESISTUBE.ECF22_C.18 Large plastic zones and extensive influence of notch under near threshold mode II and mode III loadi M., Hrstka, S. Zak, T. Vojtek https://doi.org/10.53254/ESISTUBE.ECF22_C.19 Investigation on brittle crack propagation and arrest behaviors under high crack driving force in st Fuminori Yanagimoto, Kazuki Shibanuma, Teppei https://doi.org/10.53254/ESISTUBE.ECF22_C.20

Presentation title Authors DOI Okawa, Katsuyuki Suzuki, Shuji Aihara Investigation of response of selected quasi brittle material after thermal load via combination of X I. Kumpová, T. Fila, P. Koudelka, I. Rozsypalová, Z. Keršner, D. Kytýř, M. Vopálenský, D. Vavřík, M. Vyhlidal, M. Drdácky https://doi.org/10.53254/ESISTUBE.ECF22_C.21 Intermediate self similar asymptotic presentation of the stress and damage fields in the vicinity of L.V. Stepanova https://doi.org/10.53254/ESISTUBE.ECF22_C.22 Influence of shear affected zone due to punching in tensile characteristics of steel plate Kejin Zhang, Shigeru Hamada, Motomichi Koyama, Tatsuo Yokoi, Hiroshi Noguchi https://doi.org/10.53254/ESISTUBE.ECF22_C.23 Influence of additional vibration impact and stress concentrators on kinetics of strain bands due to Chernov‐Lüders deformation and Portevin‐Le Chatelier effect in metals Tatyana Tretyakova, Ekaterina Zubov https://doi.org/10.53254/ESISTUBE.ECF22_C.24 Inelastic deformation, strain softening and localized failure in sandstone media under triaxial quas Y.F. Kovalenko, I.A. Panteleev, A.V. Zaitsev, V.I. Karev, Y.V. Sokolkin, Y.V. Sidorin, K.B. Ustinov https://doi.org/10.53254/ESISTUBE.ECF22_C.25 Hard body impact on glass panes and the fracture energy equilibrium S. Reich, R. Sagar Vanapalli https://doi.org/10.53254/ESISTUBE.ECF22_C.26 Fracture of brittle materials under uniaxial compression M. Iskander, N. Shrive https://doi.org/10.53254/ESISTUBE.ECF22_C.27 Fracture behaviour of prepreg laminates studied by in Situ SEM mechanical tests S. Bard, M. Demleitner, M. Haublein, V. Altstadt https://doi.org/10.53254/ESISTUBE.ECF22_C.28 Fracture analysis of axially flawed ring shaped bending specimen W. Musrati, B. Medjo, N. Gubeljak, P. Štefane, D. Velijić, A. Sedmak, M. Rakin https://doi.org/10.53254/ESISTUBE.ECF22_C.29 Flaw interaction under bending, residual stress and thermal shock loading H. E. Coules https://doi.org/10.53254/ESISTUBE.ECF22_C.30 Extracting the T stress in the vicinity of 3 D straight singular Y. Schapira, Z. Yosibash https://doi.org/10.53254/ESISTUBE.ECF22_C.31

Presentation title Authors DOI edges by the Quasi Dual function me Experiments and modelling of ductile fracture behaviour and fracture toughness of low–alloy C– Mn ste L. Stratil, I. Dlouhy, Y. Madi, J. Besson https://doi.org/10.53254/ESISTUBE.ECF22_C.32 Experimental study and numerical modelling of a dual phase steel behavior under dynamic loading V. Davaze, J. Besson, N. Vallino, S. Feld‐Payet, B. Langrand https://doi.org/10.53254/ESISTUBE.ECF22_C.33 Experimental investigation of the displacement field in a circular disc drilled eccentrically E.D. Pasiou, S.K. Kourkoulis, M.G. Tsousi, C.F. Markides https://doi.org/10.53254/ESISTUBE.ECF22_C.34 Experimental and numerical investigation of the fracture in steel welded joints A. Prokhorov, A. Kostina, A. Vedernikova, O. Plekhov, M. Menaka, B. Venkatraman https://doi.org/10.53254/ESISTUBE.ECF22_C.35 Experimental and Numerical Investigation of Stress Concentration and Strength Prediction of CarbonEp E. Özaslan, B. Acar, M.A. Gűler, D. Çöker https://doi.org/10.53254/ESISTUBE.ECF22_C.36 Evaluation of plastic eta factors using key curve for cracked specimens employed in J − R curve test Y. Madi, C. Leguyader, J. Besson https://doi.org/10.53254/ESISTUBE.ECF22_C.37 Effects of manufacturing plastic prestrains found on calendered and UOE pipes and pressure vessels o R.F. Moço, F.G. Cavalcante, G.H.B. Donato https://doi.org/10.53254/ESISTUBE.ECF22_C.38 Effects of crack tunneling and plasticity on the elastic unloading compliance technique L.G.F. de Andrade, G.H.B. Donato https://doi.org/10.53254/ESISTUBE.ECF22_C.39 Effect of Gradient Plasticity on Crack Initiation and Propagation in the Ductile Brittle Transition N. A. Giang, M. Kunam G. Hütter https://doi.org/10.53254/ESISTUBE.ECF22_C.40 Dispersion of graphene nanoplatelets reinforcing Type II cement paste Z.S. Metaxa, S.K. Kourkoulis https://doi.org/10.53254/ESISTUBE.ECF22_C.41 Determining material’s equivalent stress strain curve with axisymmetric notched tensile specimen S. Tu, X. Ren, J. He, Z. Zhang https://doi.org/10.53254/ESISTUBE.ECF22_C.42 Design and testing characteristics of thin steel diaphragms B. Perić, A. Simonović, T. Ivanov, S. Stupar, https://doi.org/10.53254/ESISTUBE.ECF22_C.43

Presentation title Authors DOI M. Vorkapić, O. Peković, J. Svorcan Damage and fracture of ductile sheet metal New biaxially loaded specimens for material parameter ide S. Gerke, M. Zisti, M. Schmidt, M. Brünig https://doi.org/10.53254/ESISTUBE.ECF22_C.44 Crack path stability in brittle fracture under pure mode I loading M.R. Ayatollahi, S.M.J. Razavi, F. Berto https://doi.org/10.53254/ESISTUBE.ECF22_C.45 Characterization of J R curves of a HSLA steel and an Alloy 52 DMW with SET specimens S. Lindqvist, T. Seppanen https://doi.org/10.53254/ESISTUBE.ECF22_C.46 Calibration of constitutive equations for the stress level estimation in domain with the large strai A. Neimitz, I. Dzioba, S. Lipiec https://doi.org/10.53254/ESISTUBE.ECF22_C.47 Brazilian disk tests Circular holes and size effects A.R. Torabi, S. Etesam, A. Sapora, P. Cornetti https://doi.org/10.53254/ESISTUBE.ECF22_C.48 Are the mechanical field parameters sufficient to predict uniquely the failure due to the ductile or cleavage mechanisms? Andrzej Neimitz, Jaroslaw Galkiewicz https://doi.org/10.53254/ESISTUBE.ECF22_C.49 Application of the equivalent material concept to fracture of u notched solids under small scale yie F.J. Gomez, M.A. Martin‐Rengel, J. Ruiz‐Hervias, A.R. Torabi https://doi.org/10.53254/ESISTUBE.ECF22_C.50 Application of singular integral equation to crack moving near an inclusion in two dimensional infin M. Arai, K. Yoshida https://doi.org/10.53254/ESISTUBE.ECF22_C.51 Application of material forces and path independent integrals for prediction of crack initiation and Paul Judt, Andreas Ricoeur https://doi.org/10.53254/ESISTUBE.ECF22_C.52 Applicability of local approaches to assessment of cleavage fracture in complex constraint and load J. Beswick, D. Sarzosa, R. Savioli, P. James, C. Ruggieri, A. Jivkov https://doi.org/10.53254/ESISTUBE.ECF22_C.53 Analytical limit load predictions in heterogeneous welded Single Edge notched Tension SET specimens S. Naib, W. De Waele, P. Śtefane, N. Gubeliak, S. Hertelé https://doi.org/10.53254/ESISTUBE.ECF22_C.54 An improved KI expression for a semi elliptical surface crack in a finite plate subjected to uniform Y. Dong, X. He, Y. Li https://doi.org/10.53254/ESISTUBE.ECF22_C.55 An implicit criterion of fracture growth direction for 3D simulation of hydraulic fracture propagati V. Lapon, S. Chemy https://doi.org/10.53254/ESISTUBE.ECF22_C.56

Presentation title Authors DOI A study on failure of double‐layer thermal barrier coatings subjected to uniaxial compression tests using acoustic emission analysis and digital image correlation Marcel Adam, Christian Kontermann, Matthias Oechsner https://doi.org/10.53254/ESISTUBE.ECF22_C.57 A new procedure for evaluating the R curve under static and impact loading conditions by applying tj V. Grabulov https://doi.org/10.53254/ESISTUBE.ECF22_C.58 3D stress fields versus void distributions ahead of a notch tip for semi crystalline polymers L. Laiarinandrasana, N. Selles, Y. Cheng, L. Helfen, T.F. Morgeneyer https://doi.org/10.53254/ESISTUBE.ECF22_C.59 Interfacial fracture of 3D printed bioresorbable polymers A. Gleadall, J. Allum, A. Ekinci, X. Han, V.V. Silberschmidt, W. Poon https://doi.org/10.53254/ESISTUBE.ECF22_D.1 Tensile and compression properties of variously arranged porous Ti 6Al 4V structures additively manu S. Raghavendra, A. Molinari, V. Fontanari, M. Benedetti, V. Luchin, G. Zappini, F. Johansson, J. Klarin https://doi.org/10.53254/ESISTUBE.ECF22_D.3 Bending fracture of Co Cr dental bridges, produced by additive technologies experimental investigati T. Dikova https://doi.org/10.53254/ESISTUBE.ECF22_D.4 Effect of the geometrical defectiveness on the mechanical properties of SLM biomedical Ti6Al4V latti M. Dallago, M. Benedetti, F. Zanini, S. Carmignato, D. Pasini https://doi.org/10.53254/ESISTUBE.ECF22_D.5 Experimental tests on new Ttitanium alloy interbody cervical cages G. La Rosa, C. Clienti, R. Mineo https://doi.org/10.53254/ESISTUBE.ECF22_D.6 Finite element Analysis of Fracture Toughness of Bovine Cortical Bone Effect of Osteonal Micro morph M. Wang, S. Li, V.V. Silberschmidt https://doi.org/10.53254/ESISTUBE.ECF22_D.7 Surface modification methods for fatigue properties improvement of laser beam welded Ti 6Al 4V butt F. Fornin, B. Klusemann, N. Kasnaev https://doi.org/10.53254/ESISTUBE.ECF22_E.1 Determination of residual fatigue life of welded structures at bucket wheel excavators through the Use of Fracture Mechanics M. Arsić, S. Bošnjak, N. Gnjatović, S.A. Sedmak, D. Arsić, Z. Savić https://doi.org/10.53254/ESISTUBE.ECF22_E.2 Development of simplified evaluation method of brittle crack arrest toughness on small‐scale bending test in steels Yuki Nishizono,Tomoya Kawabata, Shuji Aihara https://doi.org/10.53254/ESISTUBE.ECF22_E.3

Presentation title Authors DOI Fracture mechanics and crack growth rate of a crack in the weld metal and the heat affected zone of A.Čabrilo, K.Gerić https://doi.org/10.53254/ESISTUBE.ECF22_E.4 Quantifying the Deleterious Effect of Sea water on the Fatigue Life of Welded Steel Joints Using a F A. Smith, M. Knop https://doi.org/10.53254/ESISTUBE.ECF22_E.5 Plasticity induced intergranular and “quasi cleavage” fracture of lath martensitic steels in hydroge M. Dadfarnia, P. Sofronis, A. Nagao, B.P. Somentay, R.O. Ritchie https://doi.org/10.53254/ESISTUBE.ECF22_F.1 Proposal and verification of novel fatigue crack propagation simulation method by finite element method Temma Sano, Daisuke Sasaki, Motomichi Koyam, Shigeru Hamada, Hiroshi Noguchi https://doi.org/10.53254/ESISTUBE.ECF22_F.2 Recent studies of hydrogen embrittlement in structural materials Dan Eliezer, Ravit Silverstein https://doi.org/10.53254/ESISTUBE.ECF22_F.3 Revealing of hydrogen assisted crack growth mechanism in the low carbon steel by the in situ mechani E. D. Merson https://doi.org/10.53254/ESISTUBE.ECF22_F.4 The crucial defects induced in austenitic stainless steel upon hydrogen embrittlement by positron an M. Fujinami https://doi.org/10.53254/ESISTUBE.ECF22_F.5 The synergistic interplay of the localized plasticity HELP and decohesion HEDE mechanisms of hydroge Milos B. Djukic https://doi.org/10.53254/ESISTUBE.ECF22_F.6 Toward a non destructive diagnostic analysis tool of exercises pipelines models and experiences G. Bolzon, M. Talassi https://doi.org/10.53254/ESISTUBE.ECF22_F.7 Tracking Hydrogen Embrittlement using Short Fatigue Crack Behavior of Metals Vishal Singh, Rajwinder Singh, Amanjot Singh, Dhiraj K. Mahajan https://doi.org/10.53254/ESISTUBE.ECF22_F.8 Understanding the hydrogen embrittlement by novel critical experiments Bjørn Rune Rogne, Yun Deng, Tarlan Hajilou, Di Wan, Xu Lu, Dong Wang, Afrooz Barnoush https://doi.org/10.53254/ESISTUBE.ECF22_F.9 Understanding the interaction between a steel microstructure and hydrogen: the key to develop more hydrogen resistant materials? Tom Depover, Kim Verbeken https://doi.org/10.53254/ESISTUBE.ECF22_F.10

Presentation title Authors DOI Vacuum vs argon technology for hydrogen measurement with account for skin effect Vladimir A. Polyanskiy https://doi.org/10.53254/ESISTUBE.ECF22_F.11 A new concept for prevention of hydrogen induced mechanical degradation viewpoints of metastability Motomichi Koyama, Takeshi Eguchi, Kenshiro Ichii, Cemal Cem Tasan, Kaneaki Tsuzaki https://doi.org/10.53254/ESISTUBE.ECF22_F.12 Adaptation of hydrogen transport models at the polycrystal scale and application to the U‐bend test Yann Charles, Monique Gaspérini, Kevin Ardon, S. Ayadi ,Sofiane Benannoune, Jonathan Mougenot https://doi.org/10.53254/ESISTUBE.ECF22_F.13 Analysis of stress corrosion cracking in X80 pipeline steel An approach from the Theory of Critical Sofiane Benannoune and Jonathan Mougenot https://doi.org/10.53254/ESISTUBE.ECF22_F.14 Assessment of hydrogen embrittlement via in situ imaging techniques in high Zn Al Zn Mg alloys Hiroyuki Toda, Hang Su, Kazuyuki Shimizu, Hiro Fujihara,, Kyosuke Hirayama, Akihisa Takeuchi, Kentaro Uesugi https://doi.org/10.53254/ESISTUBE.ECF22_F.15 Assessment of the contribution of internal pressure to the Structural damage in a hydrogen charged type 316L austenitic stainless steel during slow strain rate tensile test Jean‐Gabriel Sezgin, Osamu Takakuwa, Hisao Matsunaga and Junichiro Yamabe) https://doi.org/10.53254/ESISTUBE.ECF22_F.16 Atomistic modelling of light element cosegregation at structural defects in iron Eunan J. McEniry, Tilmann Hickel, Joerg Neugebauer https://doi.org/10.53254/ESISTUBE.ECF22_F.17 Crack initiation of a 7XXX aluminium alloy in humidity analysed via Slow Strain Rate Testing Elisabeth Schwarzenbock, Levke Wiehler, Theo Hack, Christian Engel https://doi.org/10.53254/ESISTUBE.ECF22_F.18 Dislocation and twinning behaviors in high manganese steels in respect to hydrogen and material chemistry Xiaofei Guo, Stefan Zaefferer, Wolfgang Bleck, Fady Archie https://doi.org/10.53254/ESISTUBE.ECF22_F.19 EBSD characterization of hydrogen induced cracks in TRIP assisted steel A. Laureys, L. Claeys, M. Pinson, T. Depover, K. Verbeken https://doi.org/10.53254/ESISTUBE.ECF22_F.20

Presentation title Authors DOI Effect of hydrogen on the motion of dislocations during nanoindentation Jianying He, Kai Zhao, Zhiliang Zhang https://doi.org/10.53254/ESISTUBE.ECF22_F.21 Effect of vanadium alloying on hydrogen embrittlement of austenitic high nitrogen steels Galina G. Maier, Elena G. Astafurova, Valentina A. Moskvina, Evgeny V. Melnikov, Sergey V. Astafurov, Alexander G. Burlachenko, Nina K. Galchenko https://doi.org/10.53254/ESISTUBE.ECF22_F.22 Electrochemical fracture analysis of in service natural gas pipeline steels H. Nykyforchyn, O. Tsyrulnyk, O. Zvirko https://doi.org/10.53254/ESISTUBE.ECF22_F.23 Environmentally assisted fatigue crack growth mechanisms in ARMCO iron under high pressure of gaseou Tomoki Shinko, Damien Halm, Guillaume Benoit, Gilbert Hanaff https://doi.org/10.53254/ESISTUBE.ECF22_F.24 High Energy X Ray Diffraction Measurements of Strain and Dislocation Density Near Steel Fatigue cracks grown in hydrogen Matthew Connolly, Peter Bradley, Damian Lauria, Andrew Slifka, Elizabeth Drexler https://doi.org/10.53254/ESISTUBE.ECF22_F.25 Hydrogen Diffusion along Grain Boundaries Atomistic Simulations and Mechanistic Model Xiao Zhou, William Curtin, Jun Song https://doi.org/10.53254/ESISTUBE.ECF22_F.26 Hydrogen Embrittlement in Advanced High Strength Steels and Ultra High Strength Steels a new investi Antonello Cherubini, Linda Bacchi, Serena Corsinovi, Michele Maria Tedesco, Marco Beghini, Renzo Valentini https://doi.org/10.53254/ESISTUBE.ECF22_F.27 Hydrogen Embrittlement in pipelines transporting sour hydrocarbons G. Gabetta, F. Pagliari, N. Rezgui https://doi.org/10.53254/ESISTUBE.ECF22_F.28 Hydrogen Embrittlement of Steel Pipelines During Transients Zahreddine Hafsi, Sami Elaoud, Manoranjan Mishra https://doi.org/10.53254/ESISTUBE.ECF22_F.29 Hydrogen Enhanced Fatigue Crack Growth Rates in a Ferritic Fe 3wt%Si Alloy Antonio Alvaro, Di Wan, Vigdis Olden, Afrooz Barnoush https://doi.org/10.53254/ESISTUBE.ECF22_F.30 Hydrogen microvoid interaction bridging the gap between hydrogen embrittlement and ductile failure Haiyang Yu, Jim Stian Olsen, Jianying He, Zhiliang Zhang https://doi.org/10.53254/ESISTUBE.ECF22_F.31

Presentation title Authors DOI Influence of hydrogen for crack formation during mechanical clinching Daisuke Sasaki, Yuki Tampa, Toru Kato https://doi.org/10.53254/ESISTUBE.ECF22_F.32 Intrinsic ductility as a precursor to ductile fracture Predrag Andric, William Curtin https://doi.org/10.53254/ESISTUBE.ECF22_F.33 Numerical Simulation of Hydrogen Embrittlement in Iron Shinya Taketomi, Ryosuke Matsumoto https://doi.org/10.53254/ESISTUBE.ECF22_F.34 Localized Plasticity and Associated Cracking in Stable and Metastable High Entropy Alloys Pre Charge Kenshiro Ichii, Motomichi Koyama, Cemal Cem Tasan, Kaneaki Tsuzaki https://doi.org/10.53254/ESISTUBE.ECF22_F.35 Modelling of hydrogen embrittlement with a discrete dislocation plasticity coupled cohesive zone app Haiyang Yu, Edmund Tarleton, Alan Cocks https://doi.org/10.53254/ESISTUBE.ECF22_F.36 Molecular Dynamics Study of the Influence of Nonhydrostatic Stress on the Diffusion Behavior of Hydr Ryosuke Matsumoto, Shunki Nagase, Shinya Taketomi https://doi.org/10.53254/ESISTUBE.ECF22_F.37 Multi scale analyses of the different interactions between defects and hydrogen on the contribution Xavier Feaugas, Guillaume Hachet, Jiaqi Li, Arnaud Metsue, Abdelali Oudris https://doi.org/10.53254/ESISTUBE.ECF22_F.38 Effect of solid solution and subsequent artificial ageing heat treatment on the fracture resistanc Arnaud Metsue and Abdelali Oudriss https://doi.org/10.53254/ESISTUBE.ECF22_G.1 Corrosion induced mechanical properties decrease of aeronautical Al Li 2198 alloy for different temp C. Charalampidou, A. Proiou, S. Kourkoulis, N. Alexopoulos https://doi.org/10.53254/ESISTUBE.ECF22_G.2 Effects of eco friendly corrosion inhibitors on the behaviour of API X65 pipe steel under dynamic loading Hadj Meliani Mohammed https://doi.org/10.53254/ESISTUBE.ECF22_G.3 Fracture and damage behavior in an advanced heat resistant austenitic stainless steel during LCF, TM H. Warner, M. Calmunger, G. Chai, J. Palok, H. Petras, M. Heczko, T. Krumi, S. Johansson, J. Moverare https://doi.org/10.53254/ESISTUBE.ECF22_G.4 Influence of pyrolysis parameters on the efficiency of the biochar as nanoparticles into cement base I. Cosentino, L. Restuccia, G.A. Ferro, J.‐M. Tuliani https://doi.org/10.53254/ESISTUBE.ECF22_G.5 Intergranular transgranular fracture in the liquid metal N. Tsutsui, H. Koizumi https://doi.org/10.53254/ESISTUBE.ECF22_G.6

Presentation title Authors DOI embrittlement of polycrystalline zinc Phase Field Modelling of Crack Propagation in Anisotropic Polycrystalline Materials I.G. Garcia, J. Justo, A. Simon, V. Mantic https://doi.org/10.53254/ESISTUBE.ECF22_H.1 Prediction of fracture in sandwich structured composite joints using case based reasoning approach O. Rokos, R. Peerlings, M. Geers https://doi.org/10.53254/ESISTUBE.ECF22_H.2 Refinement of defect detection in the contact and non contact ultrasonic non destructive testing of K.A. Tiwari, R. Raisutis, L. Mazeika https://doi.org/10.53254/ESISTUBE.ECF22_H.3 Structures with bridged cracks and weak interfaces M. Perelmuter https://doi.org/10.53254/ESISTUBE.ECF22_H.4 The Combined Effect of Pressure and Autofrettage on the 3 D Stress Intensity Factor of an Internally M. Perl, M. Steiner https://doi.org/10.53254/ESISTUBE.ECF22_H.5 The interlaminar fracture toughness fatigue behavior of fiber metal laminates K. Dadej, J. Bieniaś, B. Surowska https://doi.org/10.53254/ESISTUBE.ECF22_H.6 The Peak Stress Method applied to bi material corners M. Ricotta, M. Zappalorto, M. Marchiori, A. Campagnolo, G. Meneghetti https://doi.org/10.53254/ESISTUBE.ECF22_H.7 Through process modeling of fracture toughness test of multipass welds incorporating residual stress Y. Mikamo, H. Kitano, T. Kawabata https://doi.org/10.53254/ESISTUBE.ECF22_H.8 Using the Hybrid Metal Extrusion & Bonding HYB Process for Dissimilar Joining of AA6082 T6 and S355 L. Sandnes, F. Abbatinali, Ø. Grong, P. Ferro, F. Berto https://doi.org/10.53254/ESISTUBE.ECF22_H.9 Viscoelastic behaviour of self reinforced polypropylene composites under bending loads P.N.B. Reis, L. Gorbartikh, J. Ivens, S.V. Lomov https://doi.org/10.53254/ESISTUBE.ECF22_H.10 A Mixed Mode Controlled DCB test on adhesive joints loaded in a combination of modes I and III Lukas Loh, Stephan Marzi https://doi.org/10.53254/ESISTUBE.ECF22_H.11 Advanced Modelling of Chloride Penetration Considering Concrete Heterogeneity T.D. Le, P. Lehner, P. Konećný https://doi.org/10.53254/ESISTUBE.ECF22_H.12 Analysis of fracture approaches based on a critical distance and comparison with experiments for cro I.G. Garcia, J. Justo, A. Simon, V. Mantic https://doi.org/10.53254/ESISTUBE.ECF22_H.13

Presentation title Authors DOI Block copolymer and core shell rubber hybrid toughening of epoxy based carbon fibre reinforced compo Andreas Klingler, Bernd Wetzel https://doi.org/10.53254/ESISTUBE.ECF22_H.14 Comparison of 1D truss and 3D solid finite elements in developing a simplified finite element model Norberto Feito Sánchez, Raj Das, Ali Daliri https://doi.org/10.53254/ESISTUBE.ECF22_H.15 Contribution of date palm fibres reinforcement to mortar fracture toughness A. Zanichelli, A. Carpinteri, G. Fortese, C. Ronchei, D. Scorza, S. Vantadori https://doi.org/10.53254/ESISTUBE.ECF22_H.16 Debond predictions using finite fracture mechanics along elastic interfaces by FEM code M. Muñoz‐Reja, L.T. Mendoza, V.M. Leśčiśin https://doi.org/10.53254/ESISTUBE.ECF22_H.17 Development and testing of the reinforced wodden windows U. Tatic, B. Šubic, A. Ugovšek, N. Starman, U. Gantar, J. Lopatič https://doi.org/10.53254/ESISTUBE.ECF22_H.18 Dynamic interlaminar fracture of layered structures T. Chen, C.M. Harvey, S. Wang, V.V. Silberschmidt https://doi.org/10.53254/ESISTUBE.ECF22_H.19 Effects of increased span on fracture toughness using non standard PCVN specimens and implications f V.S. Barbosa, C. Ruggieri https://doi.org/10.53254/ESISTUBE.ECF22_H.20 Embrittlement of RPV metal under long term irradiation S. Kotrechko https://doi.org/10.53254/ESISTUBE.ECF22_H.21 Environmental effects in biaxially orientated PMMA S.K. Ng, M.A. Kamaludin, J.P. Dear, B.R. Blackman https://doi.org/10.53254/ESISTUBE.ECF22_H.22 Evolution and characterization of thermal shock damage in oxideoxide ceramics matrix composites Z. Yang, H. Yuan https://doi.org/10.53254/ESISTUBE.ECF22_H.23 Experimental investigation of mixed mode fracture of tropical wood material B. Odounga, R. Moutou Pitti, E. Toussaint, M. Grédiac https://doi.org/10.53254/ESISTUBE.ECF22_H.24 Failure of thin films under low cycle fatigue https://doi.org/10.53254/ESISTUBE.ECF22_H.25 Fatigue behaviour of additively manufactured polylactide PLA O.H. Ezeh, L. Susmel https://doi.org/10.53254/ESISTUBE.ECF22_H.26 Formation of Slip Bands in Nano polycrystalline Copper sandwiched between Nanoscale Brittle Material T. Sumigawa, T. Kitamura https://doi.org/10.53254/ESISTUBE.ECF22_H.27

Presentation title Authors DOI Fracture behaviour of roll bonded Al brass Al multilayer composites S. Mousa, A. Abd‐ Elhady, G.‐Y, Kim, H. Sallam https://doi.org/10.53254/ESISTUBE.ECF22_H.28 Fracture criterion for tested PCM samples under strain A.A. Lukyanchunk, K.A.V. Pankov, Yu.A. Svirskiy https://doi.org/10.53254/ESISTUBE.ECF22_H.29 Geometrical design effects on direct stereolithography micro polymer additively manufactured compone A. Davoudinejad, L.C. Diaz‐Perez, D.B. Pedersen, J.A. Albajez‐GarcÍa, J.A. Tagüe‐Fabra, G. Tosello https://doi.org/10.53254/ESISTUBE.ECF22_H.30 On fracture modes of thermally cycled plasma sprayed MCrAlY+YSZ thermal barrier coatings the role of K. Slámečka, P. Skalka, L. Čelko, J. Pokluda https://doi.org/10.53254/ESISTUBE.ECF22_H.31 Numerical modelling of Hybrid 3D woven composites for stiffness and strength prediction A. Sohail, Z. Xitao, S.M. Zakir, Z. Di https://doi.org/10.53254/ESISTUBE.ECF22_H.32 Numerical investigation of climate change impacts on European wood species vulnerability S.E. Hamdi, R. Moutou Pitti https://doi.org/10.53254/ESISTUBE.ECF22_H.33 Nonlinear deformation and failure analysis of laminated composites E. Lomakin, B. Fedulov https://doi.org/10.53254/ESISTUBE.ECF22_H.34 Nanoscale wear and fracture of graphene and protection by graphene B. Vasić, R. Gajić, I. Stanković https://doi.org/10.53254/ESISTUBE.ECF22_H.35 Multiscale model of mechanical behavior of ceramics composite with soft matter filling based on mova A. Smolin, E. Slulko, A. Shalomeeva https://doi.org/10.53254/ESISTUBE.ECF22_H.36 Multi parameter average strain energy density factor criterion applied on the bi material notch prob J. Klusak, O. Krepi https://doi.org/10.53254/ESISTUBE.ECF22_H.37 Multi parameter average strain energy density criterion applied on the sharp material inclusion prob O. Krepi, J. Klusak https://doi.org/10.53254/ESISTUBE.ECF22_H.38 Modelling of hyperelastic polymers of automotive lamp under random vibration loading with proportion Chukwudi Okeke, A N Thite, J F Durodola, N A Fellows, M T Greenrod https://doi.org/10.53254/ESISTUBE.ECF22_H.39 Mixed mode cohesive zone parameters from integrated digital image correlation on micrographs only J. Hoefnagels, A. Ruybaild, O. van der Sluis, M. Geers https://doi.org/10.53254/ESISTUBE.ECF22_H.40

Presentation title Authors DOI Micromechanical Parameter Identification using Integrated DIC with Accurate Kinematic Boundary Condi Johan Hoefnagels, Ondrej Rokos, Ron Peerlings, Marc Geers https://doi.org/10.53254/ESISTUBE.ECF22_H.41 Mechanical modelling of self diagnostic polymers R. Brighenti, F. Artoni https://doi.org/10.53254/ESISTUBE.ECF22_H.42 Main factors infecting creep strain at tip of stress corrosion cracking in full life cycle Y. Cui, H. Xue, S. Wang, X. Gong https://doi.org/10.53254/ESISTUBE.ECF22_H.43 Influence of glued in reinforcement profiles on the thermal characteristics of wooden window profile B. Śubic, A. Ugovšek, N. Starman, R. Tatic, A. Kovačič, G. Fajdiga https://doi.org/10.53254/ESISTUBE.ECF22_H.44 Implications of substrate geometry and coating thickness on the cracking resistance of polymer based L.‐A. Wray, D. Ayre, P. Irving, P. Jackson, P. Jones, F. Zhao https://doi.org/10.53254/ESISTUBE.ECF22_H.45 High speed observation of fast crack propagation and arrest behaviors in 3D transparent structures F. Yanagimoto, K. Shibanuma, K. Suzuki https://doi.org/10.53254/ESISTUBE.ECF22_H.46 High Rate Response and Dynamic Failure of Aluminosilicate Glass under Compression Loading M.S. Zakir, Z. Wang, T. Suo, Y. Li, F. Zhou, A. Sohail https://doi.org/10.53254/ESISTUBE.ECF22_H.47 A microstructure sensitive modeling approach for fatigue life prediction considering the residual st C. Gu, J. Lian, Y. Bao, S. Münstermann https://doi.org/10.53254/ESISTUBE.ECF22_I.1 Defects and fatigue failure U. Zerbst, M. Madia https://doi.org/10.53254/ESISTUBE.ECF22_I.2 Effect of surface finish on the fatigue strength of pushbelt components D. Tran, B. Pennings, S. Kamath, M. Diaz https://doi.org/10.53254/ESISTUBE.ECF22_I.3 Fatigue life analysis of edge notch with damages S. Boljanović, S. Maksimović, A. Carpinteri https://doi.org/10.53254/ESISTUBE.ECF22_I.4 Influence of plate like alumina on the high cycle fatigue behaviour of 42CrMo4 steel M. Seleznev, J. Gleinig, K.Y. Wong, A. Weidner, H. Biermann https://doi.org/10.53254/ESISTUBE.ECF22_I.5 Modelling Approach for Predicting Crack Initiation at Forging Defects A. Aydin, I. Varfolomeev, C. Amann https://doi.org/10.53254/ESISTUBE.ECF22_I.6 On the effect of weld defects on the fatigue strength of beam welded butt joints A. Hesse, Th. Nitschke‐Pagel, J. Hensel, K. Dilger https://doi.org/10.53254/ESISTUBE.ECF22_I.7

Presentation title Authors DOI Evaluation of mechanical properties of polyethylene for pipes by energy approach during tensile and C. Risitano, E. Guiglielmino, D. Santonocito https://doi.org/10.53254/ESISTUBE.ECF22_L.1 Low cycle fatigue hysteresis by thermographic and digital image correlation methodologies G. La Rosa, C. Clienti, A.M. Cugno Garrano, F. Lo Savio https://doi.org/10.53254/ESISTUBE.ECF22_L.2 Plasticity induced heating – an underestimated effect in monotonic and cyclic deformation J. Bär https://doi.org/10.53254/ESISTUBE.ECF22_L.3 The heat dissipation at fatigue crack tip under mix mode loading O. Plekhov, A. Vshivkov, A. Izumova, A. Zakharov, V. Shlyanninkov https://doi.org/10.53254/ESISTUBE.ECF22_L.4 Analysis of the energy dissipation in multiaxial fatigue tests of AISI 304L stainless steel bars D. Rigon, V. Formilan, G. Meneghetti https://doi.org/10.53254/ESISTUBE.ECF22_L.5 Correlation among energy based fatigue curves and fatigue design approaches B. Atzori, M. Ricotta, G. Meneghetti https://doi.org/10.53254/ESISTUBE.ECF22_L.6 Mixed Mode Fracture Behavior of a Multi Directional Laminate Composite Produced by a Wet Layup M. Mega, L. Banks‐ Sills https://doi.org/10.53254/ESISTUBE.ECF22_M.1 Plasticity and failure behavior modeling of high strength steels under various strain rates and temp unhe Lian, Wenqi Liu, Sebastian Münstermann https://doi.org/10.53254/ESISTUBE.ECF22_M.2 The effect of condensate corrosion on tensile and fatigue properties of brazed AISI 304L stainless s A. Schmiedt, L. Lingnau, M. Manka, W. Tillmann, F. Walther https://doi.org/10.53254/ESISTUBE.ECF22_M.3 A new local approach to cleavage fracture and its application in a reactor pressure vessel W.‐S. Lei, S. Zhu, J. Correia, A. De Jesus https://doi.org/10.53254/ESISTUBE.ECF22_M.4 Application of the internal and external Williams functions for stress intensity factors assessment Y. Dubyk, I. Orynyak, E. Yakovleva https://doi.org/10.53254/ESISTUBE.ECF22_M.5 Chemical method of fatigue and corrosion fatigue crack growth arrest in steels by metal treatment wi Yaroslav Khaburskyi, Hryhoriy Nykyforchyn https://doi.org/10.53254/ESISTUBE.ECF22_M.6 Environmental Degradation Effect of High Temperature Water and Hydrogen on the Fracture Behavior of Z. Que, H.P. Seifert, P. Spatig, S.G. Rao, A. Zhang, S. Ritter https://doi.org/10.53254/ESISTUBE.ECF22_M.7

Presentation title Authors DOI Fracture behaviour and microstructure mechanics relationship of human aortic aneurysms Aziz Tokgoz, Shuo Wang, Priya Sastry, Chang Sun, Nichola Figg, Martin R. Bennett, Sanjay Sinha, Jonathan H. Gillard, Michael P. F. Sutcliffe, Zhongzhao Teng https://doi.org/10.53254/ESISTUBE.ECF22_M.8

RkJQdWJsaXNoZXIy MjM0NDE=