Presentation title Authors DOI cracks produced under lubricated rolling Fontanari, M. Dallago How microscopic stress and strain analysis can improve the understanding of the interplay between ma M. Thielen, M. Marx, M. Sheikh‐ Amiri, C. Boller, C. Motz https://doi.org/10.53254/ESISTUBE.ECF21_G.22 Impact of surface integrity on the fatigue strength of forged and shot peened components F. Morel, B. Gérin, E. Pessard, C. Verdu https://doi.org/10.53254/ESISTUBE.ECF21_G.23 A failure scenario of ceramic laminates with strong interfaces L. Náhlík, K. Štegnerová, P. Hutař https://doi.org/10.53254/ESISTUBE.ECF21_H.1 Brittle film induced cracking of ductile substrates T. Guo, X. Pang, A.A. Volinsky, L. Qiao https://doi.org/10.53254/ESISTUBE.ECF21_H.2 Crack front pinning at patterned planar interfaces in multilayer thin films A.Q. de Boiry, D. Dalmas, J.‐Y. Faou, P. Jop https://doi.org/10.53254/ESISTUBE.ECF21_H.3 Crack propagation in layers under small scale yielding J.P. Vafa, S.J. Fariborz https://doi.org/10.53254/ESISTUBE.ECF21_H.4 Experimental and numerical investigation of fracture in brittle multi layers on flexible substrate D. Dalmas, I. Ben Cheikh, J. Teisseire, J. Marthelot https://doi.org/10.53254/ESISTUBE.ECF21_H.5 Formation of nitrided layer using atmospheric controlled ih fpp and its effect on the fatigue proper S. Kikuchi, S. Ota, H. Akebono, M. Omiya, J. Komotori, A. Sugeta, Y. Nakai https://doi.org/10.53254/ESISTUBE.ECF21_H.6 Fracture analysis of a cracked orthotropic strip bonded to a magneto electro elastic layer M. Ayatollahi, M. Noarazer, J. Miendan, S. Varasteh https://doi.org/10.53254/ESISTUBE.ECF21_H.7 Inspirational multiscale biological composites H.D. Wagner https://doi.org/10.53254/ESISTUBE.ECF21_H.8 Interfacial fracture of thin elastic layers due to cyclic friction contact E. Torskaya, A. Mezrin https://doi.org/10.53254/ESISTUBE.ECF21_H.9 On propagation of interface cracks in bi layered strip in relation to delamination of coatings from K.B. Ustinov https://doi.org/10.53254/ESISTUBE.ECF21_H.10 Study of multi cracking of brittle thin films and brittle ductile multilayers on compliant substrate I.B. Cheikh, G. Parry, D. Dalmas, R. Estevez https://doi.org/10.53254/ESISTUBE.ECF21_H.11 Tailoring the fracture in layered ceramics R. Bermejo, Y. Chang, Z. Chlup, O. Sevecek, R. Danzer, G.L. Messing https://doi.org/10.53254/ESISTUBE.ECF21_H.12 The stress intensity factor of an inclined crack embedded in the central layer of an angle ply compo S. Li, J. Wang https://doi.org/10.53254/ESISTUBE.ECF21_H.13
RkJQdWJsaXNoZXIy MjM0NDE=