ECF14

A Cohesive-Zone-Model Based Fracture Criterion for Silicon Microstructures with Sharp Notches	1
A Constraint Based Statistical Approach to Failure from Complex Defects	9
A Crack Closure Correction Model for Restoring Similitude between the	17
A Creep Fatigue Crack Propagation Study of the PM Nickel Based Superalloy UDIMET 720 Li	25
A Criterion for Joints Failure	33
A Formalism to Model Environment-Sensitive Fatigue Crack Growth	41
A New Method for Fatigue Testing and Data Presentation an Illustration on Some	49
A New Procedure to Calibrate the Weibull Stress Modulus (m)	57
A New Specimen for Mode II Fracture Tests	65
A Proposal for Parameters Identification of the GTN Model - Application to CT Specimen	72
A Unified Description of Nucleation, Propagation, and Proliferation of Cracks under Creep Conditions	80
An Analysis of the Effect of Hammer Peening on the Repair of Fatigue Cracked Welded Joints	88
An Assessment of the Probability of Root Failures in Load Carrying	97
An ESIS Testing Program for a Silicon Nitride Reference Material	105
An Investigation into the Effect of Weld Strength Mismatch on the Assessment of HAZ Fracture Toughness	113
Analysis of Ductile Mixed-Mode III Fracture Initiation with a Nonlinear CDM Model	123
Analysis of Fatigue Cracks Propagation in Complex Structures	131
Anisotropic Damage Model for Concrete Including Effect of Crack Closure in Compression	139
Physical nature of brittle strength anisotropy of deformed metal	147
Applicability of the Chevron-Notch Technique for Fracture Toughness Determination in Glass	155
Application of the Beremin-Model for Predicting the Brittle Fracture	163
Application of the Master Curve Approach for Dynamically Loaded Pressure Vessel Steelsl	171
Assessment of Steel Sensitivity to Hydrogen Induced Cracking	180
Assessment of the Fatigue Failure Period of a Notched Component	188
Bioactive Ability of Alkali Treated Titanium Alloy	196
Bridged or Cohesive Crack in Bending of Fibre-Reinforced Beams	204
Brittle Fracture of Polycrystals a New Pseudo Three-Dimensional Model	212
Brittle Slow Crack Growth in Polyamide 11 Mechanics and Mechanisms (Creep and Ageing)	220
Circumferentially Notched Pipe with an External Surface Crack under Tension and Bending	228
Cleavage Fracture of an Eurocode 3 Structural Steel S460N Type	236
Comparison of ASTM and ESIS Crack Growth Corrections for J-R	244
Composite Polymeric Materials, Reinforced by Unidirectional Fibres	252
Conditions of The Fish Eyes Formation in The Process of Hydrogen Induced Destruction	260
Constraint Effect on Fracture Behaviour on Strength Mis-matched Weld Joints	268
Constraint Phenomena on the Pre-Cracked Specimens	276
Contact Strength of Ceramics under Opposed Roller Loading	285
Controlled Crack Growth with a Dual-Tip Indenter	294
Correlation Between Experiments and Strip Yield Model	303
Crack Growth in Three-Dimensional Structures	311
Crack propagation in the third mode in fiber reinforced elastic composites and in piezoelectric crystals	319
Crack Resistance Behaviour of Pressure Die Cast Magnesium Alloys	327
Crack-Healing Behaviour under Cyclic Stress and Resultant	335
Creep and Creep-Fatigue Crack Behaviour of 1Cr- and Modified 10Cr-steels in Air and Inert Gas	343
Creep Behaviour of a y Ti - Al Intermetallic Alloy	352
Critical Plane Approach for Fatigue Life Estimation under Multiaxial Random Loading	360
Critical Planes in the Round Section of an Element Taking the Stress Gradient into Account	368
Cyclic Crack Tip Deformation Due to Single Transition Cycles in Biaxial Loading	376
Damage and Crack Propagation Theories Applied to Sheet Metal Cutting	384
Damage Evolution During Cyclic Plastic Deformation of Pipeline Steel	392
Damage Mechanics Application on Destroyed Steel Bridge	400
Damage Process and Crack Propagation in Materials	408
Description of Fatigue Crack Rate with the Use of AJ Integral	416
Determination of J-Q Locus for Material of Reactor Pressure Vessel WWER 440 at Cleavage Fracture	424
Determination of Stress Intensity Factors for Cracks in Complex Stress Fields	432
Development of a Toughness Testing Technique, for Zircaloy Cladding	440
Development of Damage in Thin Plates under Cyclic Loading	448
Ductile rupture of 2024 aluminum thin sheets - Experimental study of damage growth and crack initiation	456
Ductile-Brittle Transition in Charpy and CT testsExperiments and Modelling	464
Dwell Time Effects on Fatigue Life and Damage Mechanisms	472
Dynamic Correction Functions for K - a Numerical Approach	480
Effect of Annealing on the Fracture Behavior of Polyethylene	486
Effect of Displacement Rate on Fracture Toughness of Austenite in Ductile	494
Effect of Grain Morphology on Brittle Fracture of PM Tungsten Fine Wires	502
Effect of Heat Treatment on Fracture Properties of High-Chromium White Cast Iron	510
Effect of Hydrogenation and Plastic Predeformation on the Crack Growth Resistance of Structural Steel	518
Effect of pH Level on Electrochemical Behavior	524
Elastic and Elastic-Plastic Correction Factors for DCB Specimens	532
Embrittlement of a ductile Fe9Cr1Mo steel by liquid metals	552
Energy absorption in glass-polycarbonate laminates	561
ESIS TC 8 - Numerical Round Robin on Micro-Mechanical Models	569
Estimating 3-D SE(B) Fracture Parameters using 2-D Equations	578
Evaluation of Fatigue Crack Closure from Local Compliance Measurements in Structural Steel	588
Evaluation of Miniature Specimens for the Determination of Low Constraint Cleavage Toughness	596
Evaluation of the Stress Intensity Factors for Patched Cracks with	604
Evolution of a System of Edge Cracks in the Region of Rolling Bodies Cyclic Contact	612
Experimental and Analytical Studies on Fatigue Crack Growth	620
Failure and Damage Analysis of the Cast Element	630
Failure in Prestressed Tendons	638
Failure Mechanisms of Composite Sandwich Beams under Impact Loading	646
Failure of Ti Plates for Oral and Maxillo-facial Surgery	654
Failure Probability Model of Buried Pipeline	662
Failure Properties of an A42 Pipeline Steel Butt Weld Comparison	671
Fatigue Crack Closure in Polycarbonate Under Small Excursion VA Loading	679
Fatigue Crack Growth in 0.15C-2Cr-Mo-V Steel After its High Temperature	687
Fatigue Crack Growth in Re-welded AISI 4130 High Strength Steel	694
Fatigue Crack Nuclei in Austempered Ductile Cast Iron	703
Fatigue Damage Description of Steels at Elevated Temperatures	711
Fatigue Damage Evolution in Unidirectional CFRP	719
Fatigue Damage Mechanisms in Duplex a-y Steels	727
Fatigue Life under Variable Amplitude Loading in a High	735
Fatigue of Composite Pipe Joint under Axial Tension	743
Fatigue of Materials under Cyclic Loading with Participation of the Mean Load	751
Fatigue of Structures and Materials in the 20th Century and the State of the Art.	759
Fatigue Short Crack Behaviour in the Surface Treated Medium Carbon Steel	811
Fatigue Strength of Crack-Healed Si3N4 at Elevated Temperature	847
Finite Element Study of a Double Edge Crack Specimen	855
Fracture Analyses of Circumferential Surface Cracked Pipes	863
Fracture Mechanical Approach for a Lifetime	871
Fracture Mechanics Applications to SCC beyond K	880
Fracture Mechanics Assessment of a Bi-Metallic Welded Joint	888
Fracture Model for an Interface Crack with Bridged Zone	896
Fracture Model in Bonded Joints Initiation and Propagation	904
Fracture of Bimetallic Structural Elements under Hydrogen - Temperature Interaction	912
Fracture of brittle discs under biaxial loading	920
Fracture of New Joints of Aero Structures	929
Fracture Statistics of Brittle Materials How to Choose a Better Distribution Functionl	937
Frontal Process Zone Toughening Mechanism of Ceramic-Based Nanocomposites	943
Fully Predictive Model of RCP in Plastic Pipes	951
Grain Boundary Versus Transgranular Ductile Failure in Aluminum Alloys	959
Growth Mechanism and Threshold of Mode II and Mode III Fatigue Crack	969
Growth Potential of High Aspect Ratio Elliptic Delaminations	977
Guideline on Fracture Mechanics Proof of Strength for Engineering Components	985
High Temperature Creep-Fatigue Crack Initiation in 718-DA Ni Based Superalloy	994
Identification of Tensile and Shear Failures of a Crack in Elastic-Plastic Materials	1002
Implementation of Damage Tolerance in High Cycle Fatigue Systems	1010
Induced Fracture of a 2.5D Woven SiCSiC Composite	1018
Influence Factors of the Formation of ODA in Ultralong Fatigue Life Regime	1026
Influence of Environment on Fatigue Crack Growth in Titanium Aluminides	1034
Influence of Pre-Exposition and Pre-Loading on the Environmental Stress	1042
Influence of Pre-Strain on Fatigue Strength of Squeeze Cast Al-Alloy	1050
Initiation and Growth of Thermal Fatigue Crack Networks in a 304 L Type Steel	1058
Integrity Assessment of Pressure Vessels Containing Random Number of Defects	1068
Interaction between the Faces of a Squat-type Fatigue Crack Determined	1076
Interaction of the Mode III Interface Crack with a Thin Stiff Nonideal Interface	1086
Interaction of Two Hard Indenters in the Cutting Process of Quasi-Brittle Materials	1094
Interpretation and Inverse Analysis of the Wedge Splitting Test	1102
Intersonic Decohesion Along Weak Planes Experiments and Theory	1110
Investigation of Specimen Geometry Effects and Material Inhomogeneity Effects in A533B Steel	1172
Investigation Of The Abnormal Near- Threshold Fatigue Crack Propagation on a Ti6246 Alloy_	1180
Investigations of Stress State in Cracked Steel Specimens and Wide	1188
Investigations on the Assessment of the Toughness	1196
Investigations on the Dynamic Fracture Toughness Behaviour of Nodular Cast Iron	1204
J and Limit Load Analysis of Semi-Elliptical Surface Cracks in Plates under Tension	1212
Laser Grating Extensometer LES for Whole-Field Strain Analysis in Fatigue	1220
Limit Equilibrium of a Piecewise-Homogeneous Cylindrical Shell with Cracks	1228
Linear and Geometric Nonlinear Finite Element Analysis of	1236
Local and Global Approaches to Giga Cycles Fatigue Threshold	1244
Local Approach Treatise of High YT - Ratio Steels in the Ductile-to-Brittle Transition Region	1253
Low-alloy Steel in the DBBT range	1261
Material Characterisation for Ductile Fracture by Testing of Notched Tensile Specimens	1269
Materials Effect of Sheet Thickness on Strain Localization and Toughness	1277
Mechanisms of Internal Fatigue Fracture for a Low Alloy	1285
Mechanistic Aspects of Hydrogen Damage in Fatigue Fracture of High Strength Bolt Steel	1294
Method for Estimation of Volume Damages in Composites by Usage of Acoustic Emission Criteria	1302
Methods for Residual Life Estimation of Welded Joints	1310
Micromechanical Approach - Transferability of Ductile Fracture Parameters	1318
Micromechanics of Fracture in Notched Samples of Heavily Drawn Steel	1326
Micromechanics of Hydrogen-Assisted Damage in Progressively Drawn Pearlitic Steel	1334
Micromechanics-Based Model for Trends in Toughness of Ductile Metals	1342
Microstructural Short Fatigue Crack Growth - Effect of Mixed Mode Conditions and Crack Closure	1351
Microstructure Characteristics Related to the High Temperature	1359
Microstructure Dependence of Fatigue Behaviour in Beta Ti-22V-4Al Alloy	1367
Model for Describing Fatigue Crack Growth Rate Considering Changes in the Threshold SIF	1375
Model of Surface Fatigue Crack Nucleation as Result of Corrosion Deformation Interactions	1380
Modeling of Deformation and Fracture Processes under the Thermomechanical Action	1388
Modelling crack growth by level sets	1396
Modelling of Fatigue Crack Propagation and Brittle Fracture Problems	1406
Modelling of Hydrogen Embrittlement of Metals in Wet H2S Containing Environments	1416
Modification of Dugdale Model to Include the Work Hardening and in and out of Plane Constraints	1424
Multi-Axial Failure Behaviour in Advanced Steels at Elevated Temperatures	1435
Near-Threshold Fatigue Crack Propagation in Austenitic Stainless Steels	1445
New Characteristics of Radiation Defects Evolution and Interaction	1453
New Fracture Criteria of Anisotropic Bodies with Cracks	1461
Normalisation of Material Crack Resistance Curves by the T Stress	1469
Notch Effect in Brittle-Ductile Transition Behaviour	1477
Novel Test Criteria for Determining Fracture Toughness under Pure Mode-II and Mixed-Mode Loading	1485
Numerical Modelling in Nonlinear Fracture Mechanics	1495
On Some 3-D Thermoelastic Problems of Periodically Layered Composites Containing Interface Cracks	1503
On the Applicability of Magnetic Emission Measurement	1511
On the Estimation of a Tensile Strength For Cast-irons With Phosphide Eutectic Inclusions	1519
On the Most Adequate Round Notched Specimen for Hydrogen Embrittlement Testing	1527
One Approach to Fatigue Assessment of the Components Subjected to Combined HCFLCF Loading	1535
Photoelastic and Numerical Models of the Fracture in the Multi-Layered Composites	1543
Physical Fundamental of Local Approach to Cleavage Fracture of Metals and Alloys	1551
Pipeline Steels to Running Ductile Factures; Modelling of Laboratory Test Data	1559
Prediction of Ductile Fracture of High-Rate Loaded Steel Structures	1567
Prediction of Fatigue Crack Growth Rate After Single Overload at Different Stress Ratios	1575
Prediction of Fracture in Plane Elements with Sharp Notches	1583
Probabilistic Approach for Modeling of Aggressive Environment Influence on Creep Rupture	1591
Propagation of short cracks in a high strength	1599
Reference Stress Based J and COD Estimation for Leak-Before-Break Analysis of Pressurised Piping	1607
Reheat cracking in austenitic stainless steels	1615
Requirements on the Specimen Geometry to Determine Intrinsic Fracture Mechanics Values of Polymer Materials	1623
Residual Fatigue Life of Flash Welded Steel Joints Microstructural and Overloading Effects	1632
Resistance to Fracture and Fatigue Crack Growth in Ni3Al Phase Based Intermetallic Alloy	1638
Scaling of Charpy Fracture Energy with Specimen Sizel	1647
Sensitivity to Defects and Fracture Mechanics for Metallic Materials under Fatigue Loading	1656
Similarity Scaling in 3-D Fatigue Crack Closure	1664
Simple calculation of geometrical shielding at intergranular crack front by means of pyramidal model	1671
Simulation of Multiaxial Service Loading with a View to Fatigue Life Prediction	1679
Single-Parameter Prediction of Stable Crack Growth in Large-Scale Panels	1687
Smooth Specimens Cut from the Squeeze Cast Al Alloy Car Wheels	1695
Some Critical Problems of Fracture Mechanics Concerning with Life Assessment of Materials and Structures	1703
Some Remarks on Low Cycle Fatigue Testing and Evaluation Proceduresi	1711
Statistical Evaluation of Composites Fatigue Results Using Normalizing Techniques	1719
Steady-State Failure of Adhesive Joints Using the «Plastic Wedge Peel Test»	1727
Stiffness Changes in Fiber-Reinforced Polymeric Matrix Laminates Caused by Intralaminar Damage	1735
Strength and Fracture Toughness of the ESIS Silicon Nitride Reference Material	1743
Strength of Yttria-Stabilised Zirconia with Near-Surface Grinding Residual Stresses	1751
Stress Corrosion Cracking and Corrosion Fatigue of Welded Joints	1759
Stress Corrosion Cracking Study of Austenitic Stainless Steels by the Drop Evaporation Test	1768
Stress Intensity Factor for Small-to-Medium Edge Cracks	1776
Stresses in Drawn Wires Numerical and Experimental Approach	1784
Strip Yield Model for a Crack in a Plate of Arbitrary Thickness	1792
Structural Integrity Assessment of Concrete Using a New Nondestructive Method	1800
The Applicability of Fracture-mechanics Considerations to the Fatigue	1808
The Behaviour of Kinked RCF Cracks in Contact	1810
The combination of Cellular Automata and Finite	1818
The conditions for Void Initiation in Metal Matrix Composites	1826
The Description of the Energy for Material with PIMT under Biaxial Stress State	1834
The effect of heat-treatment on ductile fracture of medium carbon steel	1842
The Effect of Microstructure on Fracture Toughness of Ultra-Low Carbon Bainitic Steels	1850
The Effect of Strain Rate on Steel Wires Failure During Cold Drawing	1859
The Effects of Correlated Input Data on Estimates of Failure Probability	1867
The Fretting Fatigue Limit Based on Local Stress at the Contact Edge	1876
The Geometry and Size Dependence of the Common Format Constraint Factor	1884
The Influence of Embrittling Additives and Residual Stresses on Fatigue	1892
The Influence of Notch Geometry and Non-Linearity on the SIF	1900
The New Criteria of Metals' Bearing Ability Evaluation	1908
The SIF Calculation of Internal Cracks under Rolling Contact Loads by a Weight Function Approach	1917
The strength of glass	1925
The Use of the Spb Parameter to Estimate the Crack Length in 6061T6	1933
Thermal Stresses Around Interface Penny-Shaped Crack in a Laminated Composite	1941
Thermo-Mechanical Effect and Criterion of Crack Propagation	1949
Three-Dimensional Boundary Element Analysis of the Behaviour	1957
Time-Changeable Fracture Mechanics Parameters for Polymers under Impact Loading	1965
Validation of R6 Using Finite Element Analyses of Cracked Cylinders under Thermal Loading	1974
Welded Ti - 6Al - 4V Plates	1984
X-Ray Dynamical Defectoscopy A Way to study Damage Processes	1992
X-ray Tomography of Short Fatigue Cracks in Ductile Iron	2002

Made with FlippingBook

RkJQdWJsaXNoZXIy MjM0NDE=