ECF13

A comparison of the mechanical properties of Fe-Cr-Si-B metallic glass wires and HT steel wires	1
A crack and a debonding initiation from a circular rigid inclusion under uniform tension or compression	9
A lifing procedure to predict life for shot-peened cast components subjected to high cycle fatigue	17
A method for determining the CTOD at cracking initiation - application to the characterization of the fracture toughness of copper	25
A new normalized characterizing fatigue function	33
A predictive law to address creep damage in welded joints of 316L(N) stainless steel.	38
A reference stress based cod estimation in LBB analysis	46
A simple damage model for ductile crack growth and transferability of R-curves	54
A simple method to evaluate statistical cyclic fatigue strength in ceramics	62
A study on the fatigue behaviour of damaged welded joints repaired by hammer peening	70
A transferring law based on a single parameter characterization of slow-stable crack extension	78
Accurate determination of the fracture toughness at low temperature by ultrasonic means	86
Advanced Fracture Mechanics Method to Analyse Crack Initiation and Propagation at Mechanical Joints	94
Advances in predicting the nucleation of fretting fatigue cracks	103
Aging effects and fracture mechanical lifetime modelling of pressurized poly(ethylene) pipes	111
An extended model for the growth and coalescence of void - application to fracture toughness prediction	119
An investigation of methods of estimating crack driving force for defects in or near welds	127
Analysis of Low-Cycle Fatigue at Notches in a Single Crystal Superalloy at High Temperature	135
Analytical and numerical modelling of failure of ceramic metal panels due to ballistic impact	143
Anisotropic cylindrical shell with surface crack	150
Application of cohesive model to dynamic ductile fracture tests	157
Approximate evaluation of directional toughness in cold drawn pearlitic steels	165
Assessment of the contribution of plastic strain gradient effects to the fatigue threshold of ductile materials	172
Averaging of the diffraction waves in composites with random structures by generalized self-consistent method	179
Bond and splitting in prestressed concrete	185
Bridge crack model and an interface strength	193
Brittle-to-tough transition in toughened polypropylene copolymers	202
Character of stress failure of high-strength concrete determined by acoustic emission method	211
Characterization of sub micron mechanical behavior and fracture processes of polymers and biomaterials	218
Comparison studies of R-curves for fatigue and tear cracks in a thin aluminium plate	224
Comparison, by electrochemical measurements, of the microbiologically induced corrosion behavior in stainless steels	232
Constraint effect and fracture of mismatched weld joints	239
Constraint effect on environmentally assisted cracking of the austenite steel 08Kh18N10T in the concentrated solutions at 270°C	247
Constraint effects and modeling under general loading conditions	254
Contact fatigue propagation of deep defects in railway wheels	262
Correlation between Charpy-V and sub-size Charpy tests results for an un-irradiated low alloy RPV ferritic steel	270
Correlation between interfacial state of plasma CVD coated TiN filmsubstrate and pinhole defect ratio evaluation by CPCD method	278
Crack initiation behaviour of PP-materials	286
Crack interaction mechanism of pre-split rock blasting	294
Cracked beam element applied to fatigue damage identification of steel bridges	302
Creep and fatigue crack growth in PE-HD pipe grades - effect of test temperature and R-ratio	310
Creep behaviour of a cast rene 41 superalloy	318
Critical phenomenon in hydrogen assisted cracking in high strength steel	326
Damage formation of a 2304 duplex stainless steel under hot working conditions	335
Damage mechanisms and fracture behaviour of thermally-aged duplex stainless steel modelling of the fracture toughness using local approach	343
Damage resistance and micromechanical analysis of ultra high performance concrete.	350
Debonding of an interface when a crack approaches perpendicularly to it	359
Defect characterisation in SA-213-T22 tube steel	367
Defect tolerant design of an helicopter tail rotor shaft	375
Determination of Fracture Mechanics Characteristic Values in the Toughness Transition Range	383
Development of edge cracks in rolling bodies	391
Development of environment controllable micro mechanical testing machine and the influence of vacuum on fracture and fatigue in aramid single fiber	399
Development of finite elements for analysis of ferroelectric ceramic materials with cracks	409
Developments in inverse analysis for in-situ flaw detection in composite material structures	417
Different CDM-models and their ability to describe the damage development at ductile fracture of steel	425
Ductile crack growth in structural steels of EUROCODE 3	433
Duplex S-N curve characteristics and subsurface fatigue crack initiation behaviour in high carbon-chromium bearing steel	441
Dynamic compression testing of metallic materials - ESIS progress towards a european standard	449
Effect of cold working ratio on and fatigue life of Ti-41.7at %Ni-SSat % Cu shape memory alloy thermo-mechanical cyclic behavior	454
Effect of Cu content on thermomechanical fatigue properties and total available strain energy of Ti-Ni-Cu shape memory alloy	462
Effect of fatigue pre-loading on mixed-mode stress corrosion cracking in high-strength steel	469
Effect of grinding on the fatigue strength of a bearing steel in the super long-life field	477
Effect of humidiy on long fatigue life more than 107 cycles in high strength steel	486
Effect of inclusions and dissolved hydrogen on the fracture toughness of pipeline steels	494
Effect of non-metallic inclusions on crack propagation and fatigue life of steel	502
Effect of specimen geometry on dynamic fracture toughness of 15H2MFA reactor pressure vessel steel	507
Effect of specimen thickness and stress ratio on fatigue crack growth after a single overload cycle on structural steel	515
Effect of temperature and strain rate on the cyclic plasticity mechanisms of an interstitial free steel - comparison with ultra high purity iron	523
Effective stress intensity factor and contact stress for partially closed oblique edge cracks	530
Effects of diffuse cracking around a cohesive crack	538
Effects of forming process on fatigue performance of wheel centre discs	546
Effects of geometry and material on the energy dissipation rate	554
Effects of loading rate and specimen configuration on the ductile-brittle transition in poly(propylene)	560
Effects of microstructure on fatigue short crack behaviour in multiphase materials	568
Energy dissipation rate as a fracture analysis tool	576
Estimation of stress intensity factors with considering crack surface contact	584
Estimation of the crack growth resistance and endurance of hard tungsten carbide-cobalt alloy products	592
Estimation of the resistance against stable crack initiation and unstable crack propagation using R-curves and stability assessment diagrams in ductile polymeric abs-materials	599
Estimation of the total life in fretting fatigue with spherical contact	607
Evaluation and development of simplified methods of analysis of the integrity of cracked redundant structures	615
Evaluation of cyclic plastic deformation by nano -indentation	623
Evaluation of fatigue life data by normalising procedures	630
Evaluation of notched fatigue strength of oxide dispersion strengthening copper alloy	639
Evaluation of the deformation of polyamide materials under tension using laser extensometry	647
Experimental analysis of fatigue crack growth life under random loading	655
Experimental and numerical investigations of the failure behaviour of components by application of fracture and damage mechanics	662
Experimental evaluation of a 7075-T7351 aluminium alloy repaired with Kevlar-carbon fiber composite for aircraft applications	670
Experimental investigation of fracture toughness parameters in quenched and tempered, and in austempered 65 Si 7 steel	678
Experimental investigation of the local deformation processes in joints under cyclic loading by traditional methods of fatigue testing	686
Experimental method to increase the loading capability of glass-fibre reinforced composite tubes	694
Extending the fatigue life of aerospace materials by surface engineering	698
Failure mechanisms in fatigue of fibre glass reinforced polyamide 6.6	706
Fatigue and monotonic properties of an interstitial free steel sheet	714
Fatigue behaviour of a thick plate of aluminium alloy 7475	722
Fatigue behaviour of aged austeno-ferritic steels	730
Fatigue crack growth at high temperature in the PM nickel base superalloy UDIMET 720 L1	738
Fatigue crack growth threshold conditions for small notches	746
Fatigue crack propagation in structural steel after overloading cycles	754
Fatigue crack propagation of laser welded butt joints	761
Fatigue crack propagation perpendicular to an interface the effect of plastic mismatch	769
Fatigue failure analysis of fan blade of D-L8 engine of “RUSLAN” aircraft	776
Fatigue failure assessment under multiaxial loading	782
Fatigue failure by flow-induced vibration	791
Fatigue life of cast irons GGG40, GGG60 and GTS45 under combined random tension with torsion	799
Fatigue life prediction of Natural Rubber components under uniaxial and multiaxial loading	807
Fatigue lifetime of a silica filled rubber. Application to a SBR shoe sole under bending.	815
Fatigue of high strength materials some critical problems of fracture mechanics	824
Fatigue strength prediction of ductile irons subjected to combined loading	832
FEM-Based Fatigue Endurance Evaluation of Engineering Components under Variable Amplitude Multiaxial Loading	840
Finite element analysis of fatigue crack growth threshold testing techniques	848
Finite element analysis of plasticity-induced crack closure for inclined cracks	855
Finite Element Analysis of the Interaction of Hydrogen Induced Stepwise Cracks	863
Finite element modelling of a smooth tensile specimen and a compact tension specimen with the Gurson-Tveergard-Needleman and Rousselier micromechanical models	871
Finite element simulations of Charpy-V and sub-size Charpy tests for a low alloy RPV ferritic steel	878
Fractal characterization of concrete damage in the strain-softening regime	886
Fractographic analysis of fatigue failure in the superlong life regime of n 107 cycles	894
Fractographic evidence and statistical inference for the cleavage fracture modelling of F82Hmod low activation steel	902
Fractographic study of two damage tolerant aluminium alloys	910
Fracture behavior of cemented carbides a fracture mechanics analysis	918
Fracture mechanical behaviour of plasma-sprayed coatings	925
Fracture mechanics properties of materials of reactor pressure vessel of wwer 440	932
Fracture mechanics testing of magnesium alloy ingots and die castings	940
Fracture mechanisms of eutectic crystals processed by directional solidification	948
Fracture of a high strength steel containing U-notches	957
Fracture process under tension deformation observing using computer simulation method	965
Fracture properties of concrete under cryogenic conditions	972
Fracture resistance and failure characteristics of AISI 304 SA508 bimetallic weld in ductile regime	980
Fracture toughness of an aluminium alloy matrix composite	988
Fracture toughness of ceramics using the SEVNB method; round robin	995
Fracture toughness of high-chromium white cast iron in relation to the primary carbide morphology	1003
Fracture variability of yttria-stabilized zirconia	1011
High cycle fatigue of ion nitrided 40Cr steel specimens	1018
Hot corrosion and fracture of nickel–base superalloys	1025
Hydrogen assisted cracking of cold drawn eutectoid steel for civil engineering structures	1029
Identification method for marks on fracture surfaces and case study (failure of propeller blade of exhaust gas ventilator)	1037
Implementation of coalescence criteria into the GTN model application to work-hardening ductile materials	1043
Improvement of stress corrosion cracking (SCC) resistance by cyclic pre-straining in 316L austenitic	1050
Improving stress corrosion cracking life of components by shot peening	1058
In situ observation on localized corrosion morphology of tin thin film coating by electrochemical AFM	1064
Influence of crystallographic misorientation on the initiation and growth of short fatigue cracks in a beta-titanium alloy	1071
Influence of different surface effects on the nucleation of microcracks	1079
Influence of loading speed on tensile strength characteristics of high tensile steel	1087
Influence of microstructure on cleavage fracture initiation micromechanisms in steels	1093
Influence of pulsed laser beam hardening on the fatigue limit of the steel 42CrMo4	1102
Influence of the aggregate-matrix interface on the fracture behaviour of concrete	1110
Influence of the sample thickness on the essential specific work of fracture	1118
Influence of thermal ageing on fatigue crack growth behaviour in cast duplex stainless steels	1126
Instabilities in fracture and deformation of polymer materials	1134
Integrity of cast components containing inhomogeneities	1138
Intergranular stress corrosion cracking (IGSCC) susceptibility of Inconel X-750 state of the art	1144
Inverse analysis of a box-section composite beam with impact damage	1150
Investigation on the Fracture Behaviour of Laser Beam Welded Wide Plates	1158
Investigations into the influence of the mechanical conditions at the crack tip on SCC test results	1167
Investigations of rail fractures at vienna underground and measures to reduce them	1175
Kinematic and kinetic events on rough sliding crack surfaces in contact	1183
Limit equilibrium of a curvilinear crack with the partial frictional contact of its surfaces	1190
Load interaction effects in high temperature fatigue and dwell crack growth	1197
Local fracture behaviour and crack tip deformation in metal foams	1205
Local parameters susceptibility checkup using fracture toughness data	1213
Local variations in yield strength – a possible means for enhancing the fracture resistance of structural components	1221
Long life fatigue properties of ferrite-pearlitic ductile cast iron with shot-peening treatment	1229
Long-term fracture of an aging transversally-isotropic composite with a circular crack under stationary loading	1235
Mathematical model of subcritical creep crack growth	1243
Mean stress in long-life torsion fatigue	1249
Mean stress, temperature and environment influences on near-threshold fatigue crack behavior of Ti6246.	1257
Mechanical strength and fracture of Sigma 1140+ SiC fibres	1265
Mesomechanical simulation of crack propagation in real and quasi-real idealized microstructures of tool steels	1273
Micromechanical aspects of constraint effects in steel for containers of spent nuclear fuel	1279
Micromechanical modeling of ductile tearing phenomena	1287
Micro-mechanical modelling of ductile tearing resulting from a thermo-mechanical loading	1294
Micromechanical view of failure of the matrix in compression in fibrous composite materials	1302
Micromechanisms of fracture in modern low carbon high strength steels	1310
Microstructural and mechanical properties of microalloyed steels processed to simulate thin slab casting and direct rolling conditions	1317
Modeling of ductile tearing of pipeline-steel wide plates	1325
Modeling of the surface microcracking in polyethylene due to uv-degradation	1333
Modelling of a fatigue cumulative damage under random loading conditions	1341
Modelling the mixed mode fracture of concrete	1350
Multi-scale model of crack propagation in unidirectional metallic matrix composites	1356
Notch stress strain distribution in Charpy V specimen experiments and modelling	1364
Novel methods for determining true stress strain curves of weldments and homogenous materials	1372
Numerical analyses of cracks in piezoelectric composite structures under electromechanical loading	1380
Numerical analysis of a mixed mode crack behavior in elastic-plastic materials	1388
Numerical determination of the dynamic key curves	1396
Numerical modelling of cyclic stress-strain fields near a crack tip the role of strain hardening	1402
Numerical modelling of the visco-plastic behaviour of a wide austenitic stainless steel cracked plate	1410
Numerical simulation of ductile fracture initiation by application of rice-tracey void growth model	1418
Numerical study of fracture in glued wood specimen	1424
On acoustic regime at fracture of steel specimens after holding in corrosion medium	1432
On the correlation between the J-integral and the crack tip finite deformation	1437
On the initial stages of corrosion fatigue emanating from smooth surface	1444
On the need to consider the volumetric distribution of stresses for high cycle multiaxial fatigue strength prediction	1451
On the preferable initial crack length in fracture toughness testing using sub-sized bending specimens	1459
On the use of photoelastic data to corroborate compliance measurements of fatigue crack closure	1467
Orientational effects on fatigue crack growth rates in a forged disc of Inconel 718 superalloy	1474
Phenomenological model of the specimen containing growing crack	1482
Phenomenological study of crack propagation in multidirectional stratified subjected to mode (I)	1491
Plane boundary value problem posed on orientation of principal stresses on the crack surface	1499
Prediction of crack growth under mode (I+II) cyclic loading	1507
Prediction of cracking under thermal fatigue	1514
Prediction of notch-emanating crack initiation life in fatigue effect of input parameters variation	1525
Predictive fracture modelling in tough polyethylenes using experimentally measured cohesive zone traction curves	1534
Propagation of Surface Cracks Under Cyclic Loading	1542
Quantification of Specimen Geometry Effects on the Master Curve and To Reference Temperature	1550
Quantitative fractography by means of a new digital image analysis system	1558
Relation between stress state and fracture resistance in mismatched weld joints.	1565
Reliability of chevron notch technique for fracture toughness determination in glass composites reinforced by long fibres	1573
Resemblance between residual stress produced by shot peening and thermal stress by temperature distribution	1581
Results of a european round robin on the impact fracture toughness of plastics at high rates of loading	1588
Role of the matrix microcracking during the creep of CMCs	1596
Safe damage fatigue criteria	1602
Scale effect and growth of large ductile cracks in aged cast duplex steel	1608
SCC behaviour of pipeline microalloyed steels	1616
SEM evaluation of hydrogen degradation in 316L austenitic stainless steel	1623
Simulation of thermomechanical behaviour of bimaterial containing an interface crack with rough faces	1631
Small Crack under Cyclic and Static Loading	1639
Some developments in dymamic fracture mechanics	1647
Statistical fatigue properties of aluminum alloys based on the statistical aspect of crack initiation and propagation behaviors	1655
Statistical model of roughness induced crack closure	1664
STAU - a general-purpose tool for probabilistic reliability assessment of ceramic components under multiaxial loading	1672
Strength degradation of SiCfiber by hydro-thermal treatment and its application to the surface modification of SiC fiber	1680
Strength estimation of ceramicmetal joints with various interlayer thickness	1685
Stress-strain state at the vicinity of the crack tip in strength mis-match welded joint	1693
Study of the performance of a most probable point correction when applied to B -PFEM models in fatigue crack propagation	1701
Study of the transfer of tensile forces by bond in eccentric reinforced concrete members	1709
Study on constitutive model of cyclic hardening process	1717
Temperature dependence of the fracture behaviour of polypropylene films	1725
Tensile and diametrical compression tests of sigma SM1140+ fibres	1733
Tensile and shear cracks behavior under plane strain small scale yielding	1741
The accelerated DK fatigue crack growth test on AA 5083-H321 and similitude validation.	1749
The application of FAD in the assessment of environmental assisted cracking and fracture conditions	1755
The application of integrity assessment procedures in optimizing the vessel surveillance programs	1766
The application of the Gurson-Tvergaard model in the aging embrittlement of austeno-ferritic stainless steels	1776
The dependency of the local approach to fracture on the calibration of material parameters	1784
The effect of nodul size on fatigue properties of ferritic nodular cast iron	1791
The effect of residual stresses on the fracture behaviour of a ferritic steel	1798
The effect of T-stress on the master curve transition temperature T0	1806
The estimation of dynamic stress intensity factor for precracked cylindrical tension specimens	1814
The euro fracture toughness dataset-generated and analysed in the SM&T-project “Fracture toughness of steel in the ductile to brittle transition regime”	1822
The fracture mechanism of carboncarbon composites with the different heat treatments at its initial stage of oxidation	1833
The influence of coating cracking and debonding on the hardness of coated systems	1841
The influence of cyclic plastic deformation on the mechanical properties of pipeline steel	1849
The influence of grain boundary energy on the propagation of brittle fracture in ferritic steels	1856
The load normalisation method for determining J-R curves in polypropylene-based materials	1864
The master curve approach and its significance in the integrity assessments of reactor pressure vessels	1872
Theoretical, experimental and numerical approach to fracture of reinforced concrete beams in bending	1879
Thermoelasticity models of cracks in the thin-walled shells	1887
Thickness dependence of cracking initiation resistance in thin aluminium plates	1896
Three-dimensional fatigue crack growth simulation under complex loading with ADAPCRACK3D	1904
Three-dimensional multiscale simulation of the initiation and growth of mixed-mode cracks in concrete under dynamic loading	1912
Transient fatigue crack growth behaviour following single overloads in an AlMgSi alloy	1920
Tribology and wear initiate fracture	1928
Turbine bolts catastrophic failure a practical case	1935
Ultrasonic method for estimating damages accumulated in conditions of creep, fatigue and tension loading	1942
Unsupervised clustering techniques for the characterisation of failure modes in a GFRP composite by acoustic emission	1949
Use of a combined isotropic non-linear kinematic hardening model to predict evolutionary cyclic stress-strain behaviour in an austenitic stainless steel	1957
Using wide plate test results to improve predictions from probabilistic fracture mechanics	1965
What kind of information can the fracture mechanics serve to NDE performance	1974

Made with FlippingBook

RkJQdWJsaXNoZXIy MjM0NDE=